Fukuda USA ● Fukuda Mexico


A Division of Nagano Keiki Group



The performance and longevity of an air leak tester can be significantly enhanced by thoughtfully configuring its application environment with peripheral equipment..



Accessories



FFM-100 series



Flow Standard (For Negative, Low , Medium Pressure)



The Calibrator ensures a steady flow rate for daily leak tester checks and calibration.

  • Flow Standard simplifies air leak tester setup, sensor sensitivity checks, and flow rate validation.
  • Connects to the tester’s pneumatic circuit (front or piping) for use.



for more information

FFM-400 series



Flow Standard (For Medium, High Pressure)



The Calibrator ensures a steady flow rate for daily leak tester checks and calibration.

  • Flow Standard: Simplifies air leak tester setup, sensor sensitivity checks, and flow rate validation.
  • Standard Leak: Connects to the tester’s pneumatic circuit (front or piping) for use.

for more information

FFM-200 series



Flow Standard (For Large flow) 200 mL/min ～ 60 L/min



Calibrator to generate a constant flow rate


Calibrator to generate a constant flow rate. Large flow(200 mL/min ～ 60 L/min)


for more information

CAL-0.1-A/CAL-1.0-A/CAL-5.0-A



Manual Calibrator



This manual calibrator performs sensitivity checks and measures test component volume. A traceability certificate can be issued for the unit.


for more information

EBU series



Exhaust Bypass Unit


The Exhaust Bypass unit releases air from tested components, bypassing the tester’s internal circuit. This prevents machine malfunctions or issues caused by contaminants like water or oil in the components.


for more information

FE series



Exhaust Bypass Unit



This unit efficiently releases air from tested components, bypassing the tester’s internal circuitry. By doing so, it safeguards the machine from malfunctions or damage due to contaminants, such as water or oil, present in the components.


for more information

CBU series



Pressurization And Exhaust Bypass Unit



This unit enhances the flow rate to the leak tester, accelerating pressurization and stabilizing pressure, especially for large-volume tested components. Additionally, it includes an exhaust bypass function for optimal performance.

for more information

ESV series



Switching Valve Unit



This unit seamlessly activates or deactivates the valve within the tested component exchange unit, responding to control signals from the leak tester. It is ideal for components with multiple measurement points, ensuring precise and efficient testing.

for more information

D14-0300



Conversion Box / Cable



Air Leak Tester – Additional Equipment Used for replacing an old model with a new one or switching between current models.

  • Easy Substitution: Swap products effortlessly.
  • Simple Upgrade: Disconnect the connector from the current tester and plug it into the new model.
  • No Rewiring: Quick and easy installation.

for more information

FPH-0100, FPH-0101 series



FUKUDA Pinhole



A pseudo-defect, characterized by pore diameter and length, is used in pressure decay and liquid immersion leak testing. It helps set standards and validate tests using defective product samples as positive controls.

  • Assessing packaging integrity per JP18 standards.
  • Determining the maximum allowable leakage limit.
  • Testing for water vapor, oxygen, and microorganism intrusion.
  • Converting qualitative leak rate standards into quantifiable pore diameter measurements.



for more information

FUkuda usa
fukuda Mexico



USA 1-270 745 7300
2721 Pioneer Drive, Bowling Green, KY 42101 USA
Mexico (52)1-449-996-0984
Av Aguascalientes Nte 622, Pulgas Pandas, 20138 Aguascalientes, Ags. Mexico


info@fukuda-us.com